Changes in the Chemical Components of Light Crude Off During Simulated Short Term Weathering     

MA Qimin LUO Xia YU Zhigang 《中国海洋大学学报(英文版)》2007,6(3):231-236

To unambiguously identify spilled oils and to link them to the known sources are extremely important in settling questions of environmental impact and legal liability. The fate and behavior of spilled oils in the environment depend on a number of physicochemical and biological factors. This paper presents the results regarding changes in chemical composition of light crude oil during simulated short-term weathering based on natural environmental conditions. The results show that the saturated hydrocarbons of the light crude oil mainly distribute between n-C8 and n-C23 and the most abundant n-alkanes are found in the n-C10 to n-C16. The main chemical components of the light crude oil are n-alkanes and isoprenoids. The aromatic compounds are subordinate chemical components. Under the conditions of the weathering simulation experiment,n-alkanes less than n-C12,toluene and 1,3-dimethyl benzene are lost after 1 d weathering,the n-C13,n-C14,naphthalene and 2-methyl-naphthalene are lost on the fifth day of weathering,and n-C15 alkane components show certain weatherproof capability. The ratios n-C17/pristane and n-C18/phytane are unaltered and can be used to identify the source of the light crude oil during the first 8 d of weathering. After 21 d,the ratio pristine/phytane can not provide much information on the source of the spilled light crude oil. Triterpanes（m/z 191） as biomarker compounds of light crude oil are more valuable.  相似文献   

UTEVA树脂分离纯化珊瑚中铀、钍的改进研究     

汤震宇  瞿建国  张安余  李秀保  杜金洲 《海洋学报》2022,44(2):11-20

珊瑚是记录海洋环境变化信息的载体之一,测定其U/Ca比值可重建海水温度或测定Th/U同位素比值可计算年龄重建海平面高度等.准确测定珊瑚中U、Th含量及同位素比值是提取所记载的海洋环境变化信息的前提,其难点在于高Ca基体分离和痕量U、Th富集纯化.基于此,本研究拟采用UTEVA树脂改进了一步富集分离珊瑚中U、Th的前处理...  相似文献   

Geochemistry,and zircon U–Pb and molybdenite Re–Os geochronology of Jilongshan Cu–Au deposit,southeastern Hubei Province,China     

A‐Juan Pang  Sheng‐Rong Li  M. Santosh  Qing‐Yu Yang  Bao‐Jian Jia  Cheng‐Dong Yang 《Geological Journal》2014,49(1):52-68

The Jilongshan skarn Cu–Au deposit is located at the Jiurui ore cluster region in the southwestern part of the Middle–Lower Yangtze River valley metallogenic belt. The region is characterized by NW‐, NNW‐ and EW‐trending faults and the mineralization occurs at the contact of lower Triassic carbonate rocks and Jurassic granodiorite porphyry intrusions. The intrusives are characterized by SiO₂, K₂O, and Na₂O concentrations ranging from 61.66 to 67.8 wt.%, 3.29 to 5.65 wt.%, and 2.83 to 3.9 wt.%, respectively. Their A/CNK (A/CNK = n(Al₂O₃)/[n(CaO) + n(Na₂O) + n(K₂O)]) ratio, δEu, and δCe vary from 0.77 to 1.17, 0.86 to 1, and 0.88 to 0.96, respectively. The rocks show enrichment in light rare earth elements ((La/Yb)_N = 7.61–12.94) and large ion lithophile elements (LILE), and depletion in high field strength elements (HFSE), such as Zr, Ti. They also display a peraluminous, high‐K calc‐alkaline signature typical of intrusives associated with skarn and porphyry Cu–Au–Mo polymetallic deposits. Laser ablation inductively coupled plasma spectrometry (LA‐ICP‐MS) zircon U–Pb age indicates that the granodiorite porphyry formed at 151.75 ± 0.70 Ma. A few inherited zircons with older ages (677 ± 10 Ma, 848 ± 11 Ma, 2645 ± 38 Ma, and 3411 ± 36 Ma) suggest the existence of an Archaean basement beneath the Middle–Lower Yangtze River region. The temperature of crystallization of the porphyry estimated from zircon thermometer ranges from 744.3 °C to 751.5 °C, and 634.04 °C to 823.8 °C. Molybdenite Re–Os dating shows that the Jilongshan deposit formed at 150.79 ± 0.82 Ma. The metallogeny and magmatism are correlated to mantle–crust interaction, associated with the subduction of the Pacific Plate from the east. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Sulfur Concentration in Geochemical Reference Materials by Solution Inductively Coupled Plasma‐Mass Spectrometry     

Monica E. Erdman  Cin‐Ty A. Lee  Wenbo Yang  Lynn Ingram 《Geostandards and Geoanalytical Research》2014,38(1):51-60

With implications for the origin of ore deposits, redox state of the atmosphere, and effects of volcanic outgassing, understanding the sulfur cycle is vital to our investigation of Earth processes. However, the paucity of sulfur concentration measurements in silicate rocks and the lack of well‐calibrated reference materials with concentrations relevant to the rocks of interest have hindered such investigations. To aid in this endeavour, this study details a new method to determine sulfur concentration via high mass resolution solution inductively coupled plasma‐mass spectrometry (ICP‐MS). The method is based on an aqua regia leach, involving relatively rapid sample preparation and analysis, and uses small test portion masses (< 50 mg). We utilised two independently prepared standard solutions to calibrate the analyses, resulting in 4% accuracy, and applied the method to eight geochemical reference materials. Measurements were reproducible to within ~ 10%. Sulfur concentrations and isotopes of six reference materials were measured additionally by elemental analyser‐combustion‐isotope ratio mass spectrometry to independently evaluate the accuracy of the ICP‐MS method. Reference materials that yielded reproducible measurements identical to published values from other laboratories (JGb‐1, JGb‐2 and MAG‐1) are considered useful materials for the measurement of sulfur. Reference materials that varied between studies but were reproducible for a given test portion perhaps suffer from sample heterogeneity and are not recommended as sulfur reference materials.  相似文献   

LA‐ICP‐MS Analysis of Small Samples: Carbonate Reference Materials and Larval Fish Otoliths     

Angélique V. Lazartigues  Pascal Sirois  Dany Savard 《Geostandards and Geoanalytical Research》2014,38(2):225-240

This article proposes a methodology to analyse the composition of very small carbonate samples such as larval fish otoliths. The chemical composition of otoliths, which are carbonate structures in the inner ear, is often used to explore population dynamics in fishes. Recent advances in laser ablation‐inductively coupled plasma‐mass spectrometry have suggested its potential application to this field. In this study, analyses were performed using a 193 nm ArF Resonetics LA system, coupled to an Agilent 7700X‐ICP‐MS, with the following ablation parameters: a beam diameter of 5 μm, energy of 3 mJ, 2.7 J cm^?2, laser repetition rate of 10 Hz and translation speed of 2.5 μm s^?1. NIST SRM 610 glass was used as the primary calibration material. Performing this protocol, characterisation of a USGS GP‐4 reference material was achieved with suitable precision and accuracy, but the USGS MACS‐3 reference material appeared more heterogeneous under the ablation conditions tested. Calibration was performed using two different beam diameters (5 and 11 μm). Capelin (Mallotus villosus) otoliths measuring between 10 and 20 μm in diameter were tested. Even though a smaller beam diameter and lower energy were used compared with those normally employed to analyse larger otoliths, the method was successful.  相似文献   

Precise and Accurate In Situ Determination of Lead Isotope Ratios in NIST,USGS, MPI‐DING and CGSG Glass Reference Materials using Femtosecond Laser Ablation MC‐ICP‐MS     

Chen Kaiyun  Yuan Honglin  Bao Zhian  Zong Chunlei  Dai Mengning 《Geostandards and Geoanalytical Research》2014,38(1):5-21

Lead isotope ratio data were obtained with good precision and accuracy using a 266 nm femtosecond laser ablation (fLA) system connected to a multi‐collector ICP‐MS (MC‐ICP‐MS) and through careful control of analytical procedures. The mass fractionation coefficient induced by 266 nm femtosecond laser ablation was approximately 28% lower than that by 193 nm excimer laser ablation (eLA) with helium carrier gas. The exponential law correction method for Tl normalisation with optimum adjusted Tl ratio was utilised to obtain Pb isotopic data with good precision and accuracy. The Pb isotopic ratios of the glass reference materials NIST SRM 610, 612, 614; USGS BHVO‐2G, BCR‐2G, GSD‐1G, BIR‐1G; and MPI‐DING GOR132‐G, KL2‐G, T1‐G, StHs60/80‐G, ATHO‐G and ML3B‐G were determined using fLA‐MC‐ICP‐MS. The measured Pb isotopic ratios were in good agreement with the reference or published values within 2s measurement uncertainties. We also present the first high‐precision Pb isotopic data for GSE‐1G, GSC‐1G, GSA‐1G and CGSG‐1, CGSG‐2, CGSG‐4 and CGSG‐5 glass reference materials obtained using the femtosecond laser ablation MC‐ICP‐MS analysis technique.  相似文献   

2021年滦州M_S4.3地震和2015年昌黎M_S4.2地震震源参数及构造意义研究     

李赫  董一兵  王熠熙 《大地测量与地球动力学》2022,42(12):1281-1287

基于京津冀地震台网观测资料,利用CAP方法反演滦州M_S4.3地震、昌黎M_S4.2地震及其M_S3.3余震的震源机制,并利用近震深度震相获得更为准确的震源深度,结合双差定位法获得2个地震序列的震源分布结果,对发震构造及成因关联开展分析研究。结果显示：1）滦州M_S4.3地震的节面Ⅰ走向、倾角、滑动角分别为211°、85°、168°,节面Ⅱ分别为302°、78°、5°,震源错动类型为走滑型,震源深度为8 km,地震序列的震源分布呈NNE向,短轴剖面显示断层面倾角近垂直,认为其发震断层面为节面Ⅰ;昌黎M_S4.2地震及M_S3.3余震的节面Ⅰ分别为189°、68°、161°及190°、61°、170°,节面Ⅱ分别为286°、72°、23°及285°、81°、29°,震源错动类型同为走滑型,震源深度为10.5 km,地震序列的震源分布呈NNE向,短轴剖面显示断层面倾角近垂直,认为其发震断层面为节面Ⅰ;2）基于滦州M_S4.3地震、昌黎M_S4.2地震及滦州M_S7.1地震的震源参数结果,结合区域地质构造等资料分析认为,3次地震的发震构造不是上地壳先存断裂,而可能与震源区的深部构造背景密切相关,即壳内包体现象是孕育这些地震的共同基础。  相似文献   

Possible chemical structures and biological precursors of different vitrinites in coal measure in Northwest China     

Dayong Liu  Ping'an Peng   《International Journal of Coal Geology》2008,75(4):204-212

Chemical structure of Jurassic vitrinites isolated from the coals in basins in NW China have been checked using solid state ¹³C NMR and flash pyrolysis-GC/MS. Study shows some Jurassic collodetrinites are rich in aliphatic products in pyrolysates, consisting with the high amount of methylene carbon in ¹³C NMR spectra. In contrast, pyrolysates of Jurassic collotelinites are rich in phenols and alkylbenzenes. Also one Pennsylvanian and one Permian vitrinite selected from the Ordos basin, NW China have been checked for comparison. The proportion of aliphatics is low in pyrolysates, and aliphatic carbon peak in ¹³C NMR spectrum of Permian vitrinite is mostly composed of gas-prone carbons compared with collodetrinites in those Jurassic basins. But both pyrolysis and ¹³C NMR data shows the Pennsylvanian vitrinite is not only gas-prone but also oil-prone. Relatively high proportion of long chain aliphatic structure of some Jurassic vitrinite in Junggar, Turpan-Hami basins may be due to the contribution of liptodetrinites, which may be included during the formation of vitrinites. And it seems that suberinite is the most possible precursor of long chain aliphatics in the structure of Jurassic collodetrinite.  相似文献   

四川汶川MS 8.0大地震地表破裂带的遥感影像解析   总被引：21，自引：1，他引：20  

付碧宏  时丕龙  张之武 《地质学报》2008,82(12):1679-1687

2008年5月12日发生于四川盆地西部龙门山断裂带的汶川MS 8.0级大地震造成巨大的人员伤亡和财产损失,并形成了空间上基本连续分布的地表破裂带（地震断层）。根据地表破裂带的解译标志及影像特征,我们充分利用震后中国科学院航空遥感飞机所获取的高分辨率航空遥感图像以及我国台湾福卫-2卫星遥感图像进行详细解译分析,并结合震后的多次野外科学考察与验证,初步查明了四川汶川MS 8.0级大地震所产生地表破裂带的空间分布特征。遥感解译分析表明汶川大地震产生的地表破裂带总计长约300 km,其几何学特征十分复杂,主要沿先存的NE走向活动断裂带呈不连续展布;变形特征以逆冲挤压为主兼具右旋走滑分量。按同震地表破裂带所在断裂带位置,可将其分为两条： 中央地表破裂带：沿映秀-北川断裂带分布,从西南开始呈北东向延伸至平武县水观乡石坎子北东一带,长约230 km,最大垂直位移量达6.0 m左右,最大右旋水平位移达5.8 m;山前地表破裂带：沿灌县-安县断裂带分布,由都江堰市向峨乡一带开始呈北东向延伸至安县雎水镇一带,长约70 km,以逆冲挤压为主,最大垂直位移量可达2.5 m。此外,遥感图像分析还表明上述地表破裂带与地质灾害分布在空间上具有十分密切的相关性,因此,挤压逆冲-走滑型地震断层的致灾效应研究是未来应该加以重视的研究课题。  相似文献   

汶川大地震（MS 8.0）同震变形作用及其与地质灾害的关系   总被引：12，自引：2，他引：10  

付小方  侯立玮  李海兵  王宗秀  邹付戈 《地质学报》2008,82(12):1733-1746

2008年5月12日发生于四川盆地西部龙门山断裂带的汶川大地震（MS 8.0）波及半个亚洲,震撼整个中国。本文通过地震后的实地调查,对发育在龙门山断裂带上的同震地表破裂带的分布、产状、继承性复活与变形特征,以及同震变形与地震地质灾害的关系等进行了初步总结,分析表明这次汶川大地震(MS 8.0)沿北川-映秀逆冲断裂和安县-灌县逆冲断裂同时发生地表破裂,前者产生以高角度逆冲兼右旋走滑为特征的地表破裂带长约275 km,后者产生以缓倾角逆冲作用为特征的地表破裂带长约80 km。汶川大地震的同震地表破裂带分布具有分段性特征,并与地表破坏程度的分带性有着一定的内在联系,详细研究表明,同震地表破裂带的产状直接影响地表破坏程度和地震地质灾害的强度,汶川大地震（MS 8.0）沿呈高角度陡倾的北川-映秀逆冲断裂发育的同震地表变形所产生的地表破坏程度和地震地质灾害的强度比沿缓倾角的安县-灌县逆冲断裂要强。从各种类型的地震断裂来看,具有垂直运动的逆冲型地震断裂所造成的地表破坏程度和地质灾害强度比具水平运动的走滑型地震断裂要强。因此,汶川大地震发生的破裂过程和同震地表变形与地震地质灾害的关系值得深入研究。  相似文献